كونتاكتور شنايدر Easy TeSys LC1E1210M5 ثلاثي الأقطاب 12 أمبير بملف 220 فولت 50 هرتز وتلامس مساعد 1NO
أرسل طلب عرض السعر، وسيزوّدك فريقنا بعرض يؤكد السعر والتوفر.
Schneider Electric LC1E1210M5 is an Easy TeSys Control three-pole contactor with three normally open power contacts and one built-in NO auxiliary. It is rated 12A AC-3/AC-3e at up to 440VAC with ambient below 55°C, and 5.5kW at 380–400VAC. The exact M5 coil operates at 220VAC, 50Hz. Suitable overload and short-circuit protection must be selected separately.
أرسل طلب عرض السعر، وسيزوّدك فريقنا بعرض يؤكد السعر والتوفر.
Get Your Discount code
Get a special discount when you buy from our store via an exclusive discount code
Share this product:
| Model | LC1E1210M5 |
|---|---|
| Series | Easy TeSys Control |
| Main poles / contacts | 3P /3NO |
| Built-in auxiliary | 1NO, terminals13–14 |
| AC-3 / AC-3e current | 12A at≤440VAC, ambient<55°C |
| AC-1 current | 25A at≤440VAC, ambient<55°C |
| Power-circuit voltage | ≤690VAC, 50/60Hz; select voltage-specific load rating |
| Coil supply | 220VAC, 50Hz (M5) |
| Motor power at220/230VAC | 3kW |
| Motor power at380/400VAC | 5.5kW |
| Motor power at415/440VAC | 5.5kW |
| Motor power at500VAC | 5.5kW |
| Power thermal current (Ith) | 25A at55°C |
| Making / breaking at440VAC | 156A /102A |
| Short-time withstand at40°C | 105A/10s;61A/60s;30A/600s |
| Power fuse recommendation | 25A gG at≤690V, type1 coordination |
| Auxiliary fuse | 10A gG at≤690V |
| Insulation voltage (Ui) | 690V |
| Impulse withstand (Uimp) | 6kV, coil not connected to power circuit |
| Pollution / overvoltage category | 3 /III |
| Coil operating / drop-out limits | 0.85–1.1Uc /0.3–0.6Uc at−5…55°C, 50Hz |
| Coil inrush / hold consumption | 95VA /8.3VA at50Hz and20°C; cosφ0.75 /0.3 |
| Coil heat dissipation | 2–3W |
| Closing / opening time | 12–22ms /4–19ms |
| Mechanical durability | 10,000,000 cycles |
| Electrical durability AC-3 / AC-1 | 1,400,000 /300,000 cycles |
| Power terminal torque | 1.2Nm |
| Control terminal torque | 1.2Nm |
| Power conductors | Without ferrule:1×1–4mm² or2×1–2.5mm²; solid/ferruled:1 or2×1–4mm² |
| Control conductors | Without ferrule:1×1–4mm² or2×1–2.5mm²; solid/ferruled:1 or2×1–4mm² |
| Auxiliary minimum switching | 17V /5mA |
| Mounting | DIN rail or plate |
| Protection degree | IP2X |
| Operating / storage ambient | −5 to+55°C /−60 to+80°C |
| Operating altitude | 3000m without derating |
| Dimensions (H × W × D) | 74 ×45 ×80mm |
| Net weight | 300g |
| Standards | EN/IEC60947-1,60947-4-1,60947-5-1 |
Schneider Easy TeSys LC1E1210M5 3P 12A Contactor 220VAC 50Hz 1NO Auxiliary
Schneider Electric LC1E1210M5 is an Easy TeSys Control three-pole contactor with three normally open power contacts and one built-in NO auxiliary. It is rated 12A AC-3/AC-3e at up to 440VAC with ambient below 55°C, and 5.5kW at 380–400VAC. The exact M5 coil operates at 220VAC, 50Hz. Suitable overload and short-circuit protection must be selected separately.
Key specifications
- Model: LC1E1210M5
- Series: Easy TeSys Control
- Main poles / contacts: 3P /3NO
- Built-in auxiliary: 1NO, terminals13–14
- AC-3 / AC-3e current: 12A at≤440VAC, ambient<55°C
- AC-1 current: 25A at≤440VAC, ambient<55°C
- Power-circuit voltage: ≤690VAC, 50/60Hz; select voltage-specific load rating
- Coil supply: 220VAC, 50Hz (M5)
- Motor power at220/230VAC: 3kW
- Motor power at380/400VAC: 5.5kW
- Motor power at415/440VAC: 5.5kW
- Motor power at500VAC: 5.5kW
- Power thermal current (Ith): 25A at55°C
- Making / breaking at440VAC: 156A /102A
- Short-time withstand at40°C: 105A/10s;61A/60s;30A/600s
- Power fuse recommendation: 25A gG at≤690V, type1 coordination
- Auxiliary fuse: 10A gG at≤690V
- Insulation voltage (Ui): 690V
- Impulse withstand (Uimp): 6kV, coil not connected to power circuit
- Pollution / overvoltage category: 3 /III
- Coil operating / drop-out limits: 0.85–1.1Uc /0.3–0.6Uc at−5…55°C, 50Hz
- Coil inrush / hold consumption: 95VA /8.3VA at50Hz and20°C; cosφ0.75 /0.3
- Coil heat dissipation: 2–3W
- Closing / opening time: 12–22ms /4–19ms
- Mechanical durability: 10,000,000 cycles
- Electrical durability AC-3 / AC-1: 1,400,000 /300,000 cycles
- Power terminal torque: 1.2Nm
- Control terminal torque: 1.2Nm
- Power conductors: Without ferrule:1×1–4mm² or2×1–2.5mm²; solid/ferruled:1 or2×1–4mm²
- Control conductors: Without ferrule:1×1–4mm² or2×1–2.5mm²; solid/ferruled:1 or2×1–4mm²
- Auxiliary minimum switching: 17V /5mA
- Mounting: DIN rail or plate
- Protection degree: IP2X
- Operating / storage ambient: −5 to+55°C /−60 to+80°C
- Operating altitude: 3000m without derating
- Dimensions (H × W × D): 74 ×45 ×80mm
- Net weight: 300g
- Standards: EN/IEC60947-1,60947-4-1,60947-5-1
أرسل طلب عرض السعر، وسيزوّدك فريقنا بعرض يؤكد السعر والتوفر.
| Model | LC1E1210M5 |
|---|---|
| Series | Easy TeSys Control |
| Main poles / contacts | 3P /3NO |
| Built-in auxiliary | 1NO, terminals13–14 |
| AC-3 / AC-3e current | 12A at≤440VAC, ambient<55°C |
| AC-1 current | 25A at≤440VAC, ambient<55°C |
| Power-circuit voltage | ≤690VAC, 50/60Hz; select voltage-specific load rating |
| Coil supply | 220VAC, 50Hz (M5) |
| Motor power at220/230VAC | 3kW |
| Motor power at380/400VAC | 5.5kW |
| Motor power at415/440VAC | 5.5kW |
| Motor power at500VAC | 5.5kW |
| Power thermal current (Ith) | 25A at55°C |
| Making / breaking at440VAC | 156A /102A |
| Short-time withstand at40°C | 105A/10s;61A/60s;30A/600s |
| Power fuse recommendation | 25A gG at≤690V, type1 coordination |
| Auxiliary fuse | 10A gG at≤690V |
| Insulation voltage (Ui) | 690V |
| Impulse withstand (Uimp) | 6kV, coil not connected to power circuit |
| Pollution / overvoltage category | 3 /III |
| Coil operating / drop-out limits | 0.85–1.1Uc /0.3–0.6Uc at−5…55°C, 50Hz |
| Coil inrush / hold consumption | 95VA /8.3VA at50Hz and20°C; cosφ0.75 /0.3 |
| Coil heat dissipation | 2–3W |
| Closing / opening time | 12–22ms /4–19ms |
| Mechanical durability | 10,000,000 cycles |
| Electrical durability AC-3 / AC-1 | 1,400,000 /300,000 cycles |
| Power terminal torque | 1.2Nm |
| Control terminal torque | 1.2Nm |
| Power conductors | Without ferrule:1×1–4mm² or2×1–2.5mm²; solid/ferruled:1 or2×1–4mm² |
| Control conductors | Without ferrule:1×1–4mm² or2×1–2.5mm²; solid/ferruled:1 or2×1–4mm² |
| Auxiliary minimum switching | 17V /5mA |
| Mounting | DIN rail or plate |
| Protection degree | IP2X |
| Operating / storage ambient | −5 to+55°C /−60 to+80°C |
| Operating altitude | 3000m without derating |
| Dimensions (H × W × D) | 74 ×45 ×80mm |
| Net weight | 300g |
| Standards | EN/IEC60947-1,60947-4-1,60947-5-1 |