كونتاكتور شنايدر Easy TeSys LC1E0910M5 ثلاثي الأقطاب 9 أمبير بملف 220 فولت 50 هرتز وتلامس مساعد 1NO
أرسل طلب عرض السعر، وسيزوّدك فريقنا بعرض يؤكد السعر والتوفر.
Schneider Electric LC1E0910M5 is an Easy TeSys Control three-pole contactor with three normally open power contacts and one built-in NO auxiliary. It is rated 9A AC-3/AC-3e at up to 440VAC with ambient below 55°C, and 4kW at 380–400VAC. The exact M5 coil operates at 220VAC, 50Hz. Suitable overload and short-circuit protection must be selected separately.
أرسل طلب عرض السعر، وسيزوّدك فريقنا بعرض يؤكد السعر والتوفر.
Get Your Discount code
Get a special discount when you buy from our store via an exclusive discount code
Share this product:
| Model | LC1E0910M5 |
|---|---|
| Series | Easy TeSys Control |
| Main poles / contacts | 3P /3NO |
| Built-in auxiliary | 1NO, terminals13–14 |
| AC-3 / AC-3e current | 9A at≤440VAC, ambient<55°C |
| AC-1 current | 25A at≤440VAC, ambient<55°C |
| Power-circuit voltage | ≤690VAC, 50/60Hz; select voltage-specific load rating |
| Coil supply | 220VAC, 50Hz (M5) |
| Motor power at220/230VAC | 2.2kW |
| Motor power at380/400VAC | 4kW |
| Motor power at415/440VAC | 4kW |
| Motor power at500VAC | 4kW |
| Power thermal current (Ith) | 25A at55°C |
| Making / breaking at440VAC | 117A /76.5A |
| Short-time withstand at40°C | 105A/10s;61A/60s;30A/600s |
| Power fuse recommendation | 20A gG at≤690V, type1 coordination |
| Auxiliary fuse | 10A gG at≤690V |
| Insulation voltage (Ui) | 690V |
| Impulse withstand (Uimp) | 6kV, coil not connected to power circuit |
| Pollution / overvoltage category | 3 /III |
| Coil operating / drop-out limits | 0.85–1.1Uc /0.3–0.6Uc at−5…55°C, 50Hz |
| Coil inrush / hold consumption | 95VA /8.3VA at50Hz and20°C; cosφ0.75 /0.3 |
| Coil heat dissipation | 2–3W |
| Closing / opening time | 12–22ms /4–19ms |
| Mechanical durability | 10,000,000 cycles |
| Electrical durability AC-3 / AC-1 | 1,400,000 /150,000 cycles |
| Power terminal torque | 1.2Nm |
| Control terminal torque | 1.2Nm |
| Power conductors | Without ferrule:1×1–4mm² or2×1–2.5mm²; solid/ferruled:1 or2×1–4mm² |
| Control conductors | Without ferrule:1×1–4mm² or2×1–2.5mm²; solid/ferruled:1 or2×1–4mm² |
| Auxiliary minimum switching | 17V /5mA |
| Mounting | DIN rail or plate |
| Protection degree | IP2X |
| Operating / storage ambient | −5 to+55°C /−60 to+80°C |
| Operating altitude | 3000m without derating |
| Dimensions (H × W × D) | 74 ×45 ×80mm |
| Net weight | 300g |
| Standards | EN/IEC60947-1,60947-4-1,60947-5-1 |
Schneider Easy TeSys LC1E0910M5 3P 9A Contactor 220VAC 50Hz 1NO Auxiliary
Schneider Electric LC1E0910M5 is an Easy TeSys Control three-pole contactor with three normally open power contacts and one built-in NO auxiliary. It is rated 9A AC-3/AC-3e at up to 440VAC with ambient below 55°C, and 4kW at 380–400VAC. The exact M5 coil operates at 220VAC, 50Hz. Suitable overload and short-circuit protection must be selected separately.
Key specifications
- Model: LC1E0910M5
- Series: Easy TeSys Control
- Main poles / contacts: 3P /3NO
- Built-in auxiliary: 1NO, terminals13–14
- AC-3 / AC-3e current: 9A at≤440VAC, ambient<55°C
- AC-1 current: 25A at≤440VAC, ambient<55°C
- Power-circuit voltage: ≤690VAC, 50/60Hz; select voltage-specific load rating
- Coil supply: 220VAC, 50Hz (M5)
- Motor power at220/230VAC: 2.2kW
- Motor power at380/400VAC: 4kW
- Motor power at415/440VAC: 4kW
- Motor power at500VAC: 4kW
- Power thermal current (Ith): 25A at55°C
- Making / breaking at440VAC: 117A /76.5A
- Short-time withstand at40°C: 105A/10s;61A/60s;30A/600s
- Power fuse recommendation: 20A gG at≤690V, type1 coordination
- Auxiliary fuse: 10A gG at≤690V
- Insulation voltage (Ui): 690V
- Impulse withstand (Uimp): 6kV, coil not connected to power circuit
- Pollution / overvoltage category: 3 /III
- Coil operating / drop-out limits: 0.85–1.1Uc /0.3–0.6Uc at−5…55°C, 50Hz
- Coil inrush / hold consumption: 95VA /8.3VA at50Hz and20°C; cosφ0.75 /0.3
- Coil heat dissipation: 2–3W
- Closing / opening time: 12–22ms /4–19ms
- Mechanical durability: 10,000,000 cycles
- Electrical durability AC-3 / AC-1: 1,400,000 /150,000 cycles
- Power terminal torque: 1.2Nm
- Control terminal torque: 1.2Nm
- Power conductors: Without ferrule:1×1–4mm² or2×1–2.5mm²; solid/ferruled:1 or2×1–4mm²
- Control conductors: Without ferrule:1×1–4mm² or2×1–2.5mm²; solid/ferruled:1 or2×1–4mm²
- Auxiliary minimum switching: 17V /5mA
- Mounting: DIN rail or plate
- Protection degree: IP2X
- Operating / storage ambient: −5 to+55°C /−60 to+80°C
- Operating altitude: 3000m without derating
- Dimensions (H × W × D): 74 ×45 ×80mm
- Net weight: 300g
- Standards: EN/IEC60947-1,60947-4-1,60947-5-1
أرسل طلب عرض السعر، وسيزوّدك فريقنا بعرض يؤكد السعر والتوفر.
| Model | LC1E0910M5 |
|---|---|
| Series | Easy TeSys Control |
| Main poles / contacts | 3P /3NO |
| Built-in auxiliary | 1NO, terminals13–14 |
| AC-3 / AC-3e current | 9A at≤440VAC, ambient<55°C |
| AC-1 current | 25A at≤440VAC, ambient<55°C |
| Power-circuit voltage | ≤690VAC, 50/60Hz; select voltage-specific load rating |
| Coil supply | 220VAC, 50Hz (M5) |
| Motor power at220/230VAC | 2.2kW |
| Motor power at380/400VAC | 4kW |
| Motor power at415/440VAC | 4kW |
| Motor power at500VAC | 4kW |
| Power thermal current (Ith) | 25A at55°C |
| Making / breaking at440VAC | 117A /76.5A |
| Short-time withstand at40°C | 105A/10s;61A/60s;30A/600s |
| Power fuse recommendation | 20A gG at≤690V, type1 coordination |
| Auxiliary fuse | 10A gG at≤690V |
| Insulation voltage (Ui) | 690V |
| Impulse withstand (Uimp) | 6kV, coil not connected to power circuit |
| Pollution / overvoltage category | 3 /III |
| Coil operating / drop-out limits | 0.85–1.1Uc /0.3–0.6Uc at−5…55°C, 50Hz |
| Coil inrush / hold consumption | 95VA /8.3VA at50Hz and20°C; cosφ0.75 /0.3 |
| Coil heat dissipation | 2–3W |
| Closing / opening time | 12–22ms /4–19ms |
| Mechanical durability | 10,000,000 cycles |
| Electrical durability AC-3 / AC-1 | 1,400,000 /150,000 cycles |
| Power terminal torque | 1.2Nm |
| Control terminal torque | 1.2Nm |
| Power conductors | Without ferrule:1×1–4mm² or2×1–2.5mm²; solid/ferruled:1 or2×1–4mm² |
| Control conductors | Without ferrule:1×1–4mm² or2×1–2.5mm²; solid/ferruled:1 or2×1–4mm² |
| Auxiliary minimum switching | 17V /5mA |
| Mounting | DIN rail or plate |
| Protection degree | IP2X |
| Operating / storage ambient | −5 to+55°C /−60 to+80°C |
| Operating altitude | 3000m without derating |
| Dimensions (H × W × D) | 74 ×45 ×80mm |
| Net weight | 300g |
| Standards | EN/IEC60947-1,60947-4-1,60947-5-1 |