ريليه حماية حرارية شنايدر Easy TeSys LRE22 بمدى 16–24 أمبير فئة فصل 10A
أرسل طلب عرض السعر، وسيزوّدك فريقنا بعرض يؤكد السعر والتوفر.
Schneider Electric LRE22 is an Easy TeSys Protect Class 10A thermal overload relay with an adjustable 16–24A range for motor protection. It includes phase-failure sensitivity, a 1NO+1NC signalling pair, trip indication and selectable manual or automatic reset. The exact specification lists LC1E25–38 contactor compatibility. Separate rail or plate mounting requires an accessory; the contactor and short-circuit protection are selected separately.
أرسل طلب عرض السعر، وسيزوّدك فريقنا بعرض يؤكد السعر والتوفر.
Get Your Discount code
Get a special discount when you buy from our store via an exclusive discount code
Share this product:
| Model | LRE22 |
|---|---|
| Series / type | Easy TeSys Protect differential thermal overload relay |
| Adjustment range | 16–24A |
| Trip class | Class 10A, IEC 60947-4-1 |
| Application | Motor overload and phase-failure protection |
| Compatible contactors | LC1E25…38 |
| Tripping threshold | 1.14 ±0.06 × Ir, IEC 60947-4-1 |
| Phase-failure response | Trip at 130% of Ir in two phases with the third phase at zero |
| Auxiliary contacts | 1NO (97–98) + 1NC (95–96) |
| Signalling thermal current (Ith) | 5A; utilization-specific switching rating applies |
| Reset modes | Manual or automatic, selected to suit the control circuit; automatic reset can allow restart |
| Controls | Test, stop and reset |
| Mounting | Under contactor; rail/plate mounting with specific accessories |
| Power operational voltage (Ue) | ≤690VAC |
| Network | AC, 50/60Hz |
| Power insulation voltage (Ui) | 690V IEC |
| Impulse withstand (Uimp) | 6kV |
| Temperature compensation | −20 to +60°C |
| Protection degree | IP20, IEC 60529 |
| Operating ambient | −20 to +60°C without derating; up to +70°C with derating |
| Storage ambient | −60 to +80°C |
| Signalling conductors | Two 1–2.5mm² conductors: solid or flexible with/without cable ends |
| Signalling terminal torque | 1.7Nm |
| Standards | EN/IEC 60947-4-1 and EN/IEC 60947-5-1 |
| Power conductors | One solid or flexible without ferrule 2.5–10mm²; flexible with ferrule 1.5–6mm² |
| Power terminal torque | 2.5Nm |
| Power / signalling wire stripping | 10mm / 8mm (LRE22–LRE35 installation table) |
| Associated power fuses | 50A gG or 25A aM per manufacturer coordination; separate selection |
| Associated signalling fuse | 5A gG |
| Dimensions (H × W × D) | 44.5 × 45 × 70mm |
| Net weight | 130g |
| Local signalling | Trip indicator |
Schneider Easy TeSys Protect LRE22 16–24A Class 10A Thermal Overload Relay
Schneider Electric LRE22 is an Easy TeSys Protect Class 10A thermal overload relay with an adjustable 16–24A range for motor protection. It includes phase-failure sensitivity, a 1NO+1NC signalling pair, trip indication and selectable manual or automatic reset. The exact specification lists LC1E25–38 contactor compatibility. Separate rail or plate mounting requires an accessory; the contactor and short-circuit protection are selected separately.
Key specifications
- Model: LRE22
- Series / type: Easy TeSys Protect differential thermal overload relay
- Adjustment range: 16–24A
- Trip class: Class 10A, IEC 60947-4-1
- Application: Motor overload and phase-failure protection
- Compatible contactors: LC1E25…38
- Tripping threshold: 1.14 ±0.06 × Ir, IEC 60947-4-1
- Phase-failure response: Trip at 130% of Ir in two phases with the third phase at zero
- Auxiliary contacts: 1NO (97–98) + 1NC (95–96)
- Signalling thermal current (Ith): 5A; utilization-specific switching rating applies
- Reset modes: Manual or automatic, selected to suit the control circuit; automatic reset can allow restart
- Controls: Test, stop and reset
- Mounting: Under contactor; rail/plate mounting with specific accessories
- Power operational voltage (Ue): ≤690VAC
- Network: AC, 50/60Hz
- Power insulation voltage (Ui): 690V IEC
- Impulse withstand (Uimp): 6kV
- Temperature compensation: −20 to +60°C
- Protection degree: IP20, IEC 60529
- Operating ambient: −20 to +60°C without derating; up to +70°C with derating
- Storage ambient: −60 to +80°C
- Signalling conductors: Two 1–2.5mm² conductors: solid or flexible with/without cable ends
- Signalling terminal torque: 1.7Nm
- Standards: EN/IEC 60947-4-1 and EN/IEC 60947-5-1
- Power conductors: One solid or flexible without ferrule 2.5–10mm²; flexible with ferrule 1.5–6mm²
- Power terminal torque: 2.5Nm
- Power / signalling wire stripping: 10mm / 8mm (LRE22–LRE35 installation table)
- Associated power fuses: 50A gG or 25A aM per manufacturer coordination; separate selection
- Associated signalling fuse: 5A gG
- Dimensions (H × W × D): 44.5 × 45 × 70mm
- Net weight: 130g
- Local signalling: Trip indicator
أرسل طلب عرض السعر، وسيزوّدك فريقنا بعرض يؤكد السعر والتوفر.
| Model | LRE22 |
|---|---|
| Series / type | Easy TeSys Protect differential thermal overload relay |
| Adjustment range | 16–24A |
| Trip class | Class 10A, IEC 60947-4-1 |
| Application | Motor overload and phase-failure protection |
| Compatible contactors | LC1E25…38 |
| Tripping threshold | 1.14 ±0.06 × Ir, IEC 60947-4-1 |
| Phase-failure response | Trip at 130% of Ir in two phases with the third phase at zero |
| Auxiliary contacts | 1NO (97–98) + 1NC (95–96) |
| Signalling thermal current (Ith) | 5A; utilization-specific switching rating applies |
| Reset modes | Manual or automatic, selected to suit the control circuit; automatic reset can allow restart |
| Controls | Test, stop and reset |
| Mounting | Under contactor; rail/plate mounting with specific accessories |
| Power operational voltage (Ue) | ≤690VAC |
| Network | AC, 50/60Hz |
| Power insulation voltage (Ui) | 690V IEC |
| Impulse withstand (Uimp) | 6kV |
| Temperature compensation | −20 to +60°C |
| Protection degree | IP20, IEC 60529 |
| Operating ambient | −20 to +60°C without derating; up to +70°C with derating |
| Storage ambient | −60 to +80°C |
| Signalling conductors | Two 1–2.5mm² conductors: solid or flexible with/without cable ends |
| Signalling terminal torque | 1.7Nm |
| Standards | EN/IEC 60947-4-1 and EN/IEC 60947-5-1 |
| Power conductors | One solid or flexible without ferrule 2.5–10mm²; flexible with ferrule 1.5–6mm² |
| Power terminal torque | 2.5Nm |
| Power / signalling wire stripping | 10mm / 8mm (LRE22–LRE35 installation table) |
| Associated power fuses | 50A gG or 25A aM per manufacturer coordination; separate selection |
| Associated signalling fuse | 5A gG |
| Dimensions (H × W × D) | 44.5 × 45 × 70mm |
| Net weight | 130g |
| Local signalling | Trip indicator |